地址:北京市丰台区航丰路一号时期财产六合1006室
电话:010-57812783
传真:010-57812783
手机:18610773128
联系人:帅蜜斯
E-mail:sui.denise@cohesion.cc
Tulsion® A-8X MP ISO-9001/ISO-14001/OHSAS-18000
Tulsion® 催化剂级大孔弱碱性阴离子交流树脂
Tulsion® A-8X MP 是一款大孔催化剂级的弱碱性阴离子交流树脂,次要用于催化感化和一些化学制程中,特别是在MEG净化中。工业生产中催化剂和一些化学制程中离子交换树脂的利用正在变得愈来愈主要。与同种的催化剂比拟他们具有以下优势:
a.简单处置。
b.低落或去除废弃物处置的成绩。
c.提高产物的纯度和产量。
d.比利用划一催化感化的酸的本钱低。
e.解除大概大大的削弱腐化成绩。
f.强力的抗净化才能,在颠末去净化处置后能规复本来机能。
Tulsion® A-8X MP 化剂级树脂具有超卓的物理和化学机能,而且极耐磨损。且这类树脂具有优良的热稳定性和可再生利用机能。
典范特性(TYPICAL CHARACTERISTICS): Tulsion A-8X MP
树脂类型/Resin Type 大孔弱碱性阴离子交流树脂
官能团/Functional group 聚苯乙烯共聚物
物理型式/Physical form 潮湿球状/Moist spherical beads
离子型式/Ionic form supplied 游离碱/Free base form
官能团/Functional group 叔胺基/Tertiary amine
粒度散布/Particle size Distribution 0.3 - 1.2 mm
膨胀率/Swelling(approx. ) 游离碱->Cl- 18%
目数/Screen size USS (湿) 16 to 50
PH 范畴/PH range 0 - 9
总交换量/Total exchange capacity( meq/ml ) 1.3 meq/ml mini
容积密度/Backwash settled density 640 - 680 gm/lit(40 - 42 lbs/cft)
最大温度/Maximum Thermal Stability 80℃(175℉)
湿度/Moisture content 55±3%
溶解度/Solubility 不溶
操纵条件特性 TYPICAL OPERATING CONDITIONS Tulsion A-8X MP
树脂床高度/Resin bed depth 600 mm
最大流速/Maximum service flow 40m³/hr/m³
逆洗收缩空间/Backwash expansion space 50 - 70%
逆洗收缩空间/Backwash expansion flow rate(25℃) 4 - 6m³/hr/㎡
再生剂/Regenerant NaOH, Na2CO3,NH4OH
再生水平/Regeneration level 120% of the operating capacity for NaOH
再生浓度/Regeneration concentration 1 - 5%
再生工夫/Regeneration time 20 - 60 分钟
操纵温度/Maximum Operating temperature 80℃ max
冲刷流速/Rinse flow rate: 慢/slow 再生流速/At Regeneration flow rate
快/fast 事情流速/At service flow rate
冲刷体积/Rinse volume 2 - 7m³/m³
余氯/Free chlorine 未检测到/Not traceable
混浊度/Turbidity 小于2 NTU/Less than 2 NTU
铁和重金属/Iron and heavy metals 小于0.1ppm/Less than 0.1 ppm
测试(TESTING): Tulsion A-8X MP
离子交换树脂的抽样和测试是按尺度的测试法式,即ASTMD - 2187和IS - 7330,1998.
包装(PACKING): Tulsion A-8X MP
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact::